nut and bolt
feeders
We supply a
range of rotary, vibratory and cassette type
nut feeders
tooling
Our tooling is based on an air-retained location pin eliminating the need for additional insulation.
used & ex demo
We sometimes have used machines
in good condition
or ex demonstration
in stock.
Automatic Vibratory Nut Feeder AFV-N
Dengensha Vibrating feeders are designed and built
to feed all kinds of weld nuts, such as hexagon, circular, collared flange and T nuts.
Features
- High-feed rates
- Purpose-designed separators for reliability
- Flexible feeding methods make it easy to feed a nut to a distant point up to 10m from the separator consistently as the separated nut is fed by air through a vinyl tube to the feed unit.
- Nut is held firmly at the end of the magnetised spindle and fed positively to a locator even if the feeding angle and/or speed changes.
Other features
- Vibratory nut selection for all kinds of nuts
- High feed and reliability rates >1 second
- Single or dual (simultaneous) feeding
- Special dual (left, right, both) option on independent models
- Siemens controls (standard)
- Easy to use in manual or robotic systems
- Bulk hopper 7 litres
- (M6 Square DIN = 8,000)
- (M8 Square DIN = 4,000)
- CE specification
- Trained support network
- Onboard programming
- Program back-up and recover
| Vibratory Nut Feeder | |
| Selection capability | up to 60 per min |
| Feeding stroke | 200mm |
| Feeding angle | 30° - 60° adjustable |
| Power supply | 110V 50Hz or 230V 50Hz |
| Control voltage | 24V DC |
| Air supply | 5 bar |
| Standard | bulk hopper |
| Options | 300mm stroke |
| vinyl dust cover | |
| tube length up to 10m | |
| orientation guide | |